Bauteilbezogene Speicherung prozessrelevanter Daten: Eine flexible Nachrüstlösung zur Prozessdatenakquise

Bernd Arno Behrens; Richard Krimm; Jonas Koß; André Höber

doi:10.1515/zwf-2022-1011

Bauteilbezogene Speicherung prozessrelevanter Daten: Eine flexible Nachrüstlösung zur Prozessdatenakquise

Bernd Arno Behrens, Richard Krimm, Jonas Koß, André Höber^*

^*Korrespondierende*r Autor*in für diese Arbeit

Institut für Umformtechnik und Umformmaschinen

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Abstract

The use of acquired measurement data for the monitoring and optimization of processes is becoming more and more important in production engineering. This paper describes the setup of a data acquisition system for forming machines. In addition to the design and selection of suitable system components, the appropriate processing and reduction of the data is essential. The latter aspects are explained for a cutting shock monitoring system based on a permanent measurement of the slide position.

Titel in Übersetzung	Component-related storage of process-relevant data: A flexible retrofit solution for process data acquisition
Originalsprache	Deutsch
Seiten (von - bis)	66-70
Seitenumfang	5
Fachzeitschrift	Zeitschrift Kunststofftechnik (druck)
Jahrgang	117
Ausgabenummer	1-2
DOIs	https://doi.org/10.1515/zwf-2022-1011
Publikationsstatus	Veröffentlicht - 10 Feb. 2022

Schlagwörter

Digitalization
Facility Monitoring
IIoT
Process Data Acquisition
Retrofit

ASJC Scopus Sachgebiete

Polymere und Kunststoffe
Allgemeiner Maschinenbau
Strategie und Management
Managementlehre und Operations Resarch

Zugriff auf Dokument

10.1515/zwf-2022-1011

Andere Dateien und Links

Verknüpfung zur Publikation in Scopus

Dieses zitieren

@article{ac9d0a9ff59e4cd9bc59702ef51dcef1,

title = "Bauteilbezogene Speicherung prozessrelevanter Daten: Eine flexible Nachr{\"u}stl{\"o}sung zur Prozessdatenakquise",

abstract = "The use of acquired measurement data for the monitoring and optimization of processes is becoming more and more important in production engineering. This paper describes the setup of a data acquisition system for forming machines. In addition to the design and selection of suitable system components, the appropriate processing and reduction of the data is essential. The latter aspects are explained for a cutting shock monitoring system based on a permanent measurement of the slide position.",

keywords = "Digitalization, Facility Monitoring, IIoT, Process Data Acquisition, Retrofit, Digitalization, Facility Monitoring, IIoT, Process Data Acquisition, Retrofit",

author = "Behrens, {Bernd Arno} and Richard Krimm and Jonas Ko{\ss} and Andr{\'e} H{\"o}ber",

note = "Funding information: Das IGF-Vorhaben 20447 N der Europ{\"a}ischen Forschungsgesellschaft f{\"u}r Blechverarbeitung e. V. (EFB) wurde {\"u}ber die AiF im Rahmen des Programms zur F{\"o}rderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium f{\"u}r Wirtschaft und Klimaschutz aufgrund eines Beschlusses des Deutschen Bundestages gef{\"o}rdert.",

year = "2022",

month = feb,

day = "10",

doi = "10.1515/zwf-2022-1011",

language = "Deutsch",

volume = "117",

pages = "66--70",

journal = "Zeitschrift Kunststofftechnik (druck)",

issn = "1864-2217",

publisher = "Walter de Gruyter GmbH",

number = "1-2",

}

TY - JOUR

T1 - Bauteilbezogene Speicherung prozessrelevanter Daten

T2 - Eine flexible Nachrüstlösung zur Prozessdatenakquise

AU - Behrens, Bernd Arno

AU - Krimm, Richard

AU - Koß, Jonas

AU - Höber, André

N1 - Funding information: Das IGF-Vorhaben 20447 N der Europäischen Forschungsgesellschaft für Blechverarbeitung e. V. (EFB) wurde über die AiF im Rahmen des Programms zur Förderung der Industriellen Gemeinschaftsforschung (IGF) vom Bundesministerium für Wirtschaft und Klimaschutz aufgrund eines Beschlusses des Deutschen Bundestages gefördert.

PY - 2022/2/10

Y1 - 2022/2/10

N2 - The use of acquired measurement data for the monitoring and optimization of processes is becoming more and more important in production engineering. This paper describes the setup of a data acquisition system for forming machines. In addition to the design and selection of suitable system components, the appropriate processing and reduction of the data is essential. The latter aspects are explained for a cutting shock monitoring system based on a permanent measurement of the slide position.

AB - The use of acquired measurement data for the monitoring and optimization of processes is becoming more and more important in production engineering. This paper describes the setup of a data acquisition system for forming machines. In addition to the design and selection of suitable system components, the appropriate processing and reduction of the data is essential. The latter aspects are explained for a cutting shock monitoring system based on a permanent measurement of the slide position.

KW - Digitalization

KW - Facility Monitoring

KW - IIoT

KW - Process Data Acquisition

KW - Retrofit

KW - Digitalization

KW - Facility Monitoring

KW - IIoT

KW - Process Data Acquisition

KW - Retrofit

UR - http://www.scopus.com/inward/record.url?scp=85124882229&partnerID=8YFLogxK

U2 - 10.1515/zwf-2022-1011

DO - 10.1515/zwf-2022-1011

M3 - Artikel

SN - 1864-2217

VL - 117

SP - 66

EP - 70

JO - Zeitschrift Kunststofftechnik (druck)

JF - Zeitschrift Kunststofftechnik (druck)

IS - 1-2

ER -