Driving concepts for bundled ultrasonic linear motors

Maik Mracek; Tobias Hemsel; Thomas Sattel; Piotr Vasiljev; Joerg Wallaschek

doi:10.1007/s10832-007-9123-5

Driving concepts for bundled ultrasonic linear motors

Maik Mracek^*, Tobias Hemsel, Thomas Sattel, Piotr Vasiljev, Joerg Wallaschek

^*Corresponding author for this work

Research output: Contribution to journal › Article › Research › peer review

Abstract

Several positioning tasks demand translatory drive instead of rotary motion. To achieve drives that are capable, e.g., to drive the sunroof of a car or to lift a car's window, multiple miniaturized motors can be combined. But in this case many other questions arise: The electromechanical behavior of the individual motors differs slightly, the motor characteristics are strongly dependent on the driving parameters and the driven load, many applications need some extra power for special cases like overcoming higher forces periodically. Thus, the bundle of motors has to act well-organized and at last controlled to get an optimized drive that is not oversized and costly.

Original language	English
Pages (from-to)	153-158
Number of pages	6
Journal	Journal of electroceramics
Volume	20
Issue number	3-4
DOIs	https://doi.org/10.1007/s10832-007-9123-5
Publication status	Published - 17 May 2007
Externally published	Yes

Keywords

Characteristics
Control
High power
Modeling
Ultrasonic linear motor

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Ceramics and Composites
Condensed Matter Physics
Mechanics of Materials
Electrical and Electronic Engineering
Materials Chemistry

Access to Document

10.1007/s10832-007-9123-5

Cite this

@article{bf8c8964348c434c84a333d8ab5bbb96,

title = "Driving concepts for bundled ultrasonic linear motors",

abstract = "Several positioning tasks demand translatory drive instead of rotary motion. To achieve drives that are capable, e.g., to drive the sunroof of a car or to lift a car's window, multiple miniaturized motors can be combined. But in this case many other questions arise: The electromechanical behavior of the individual motors differs slightly, the motor characteristics are strongly dependent on the driving parameters and the driven load, many applications need some extra power for special cases like overcoming higher forces periodically. Thus, the bundle of motors has to act well-organized and at last controlled to get an optimized drive that is not oversized and costly.",

keywords = "Characteristics, Control, High power, Modeling, Ultrasonic linear motor",

author = "Maik Mracek and Tobias Hemsel and Thomas Sattel and Piotr Vasiljev and Joerg Wallaschek",

note = "Funding Information: Acknowledgments This work has been carried out within the graduate college “Automatic Configuration in Open Systems” of the Heinz Nixdorf Institute Paderborn. The financial support of Stiftung Westfalen and Deutsche Forschungsgemeinschaft is gratefully acknowledged. Copyright: Copyright 2008 Elsevier B.V., All rights reserved.",

year = "2007",

month = may,

day = "17",

doi = "10.1007/s10832-007-9123-5",

language = "English",

volume = "20",

pages = "153--158",

journal = "Journal of electroceramics",

issn = "1385-3449",

publisher = "Springer Netherlands",

number = "3-4",

}

TY - JOUR

T1 - Driving concepts for bundled ultrasonic linear motors

AU - Mracek, Maik

AU - Hemsel, Tobias

AU - Sattel, Thomas

AU - Vasiljev, Piotr

AU - Wallaschek, Joerg

N1 - Funding Information: Acknowledgments This work has been carried out within the graduate college “Automatic Configuration in Open Systems” of the Heinz Nixdorf Institute Paderborn. The financial support of Stiftung Westfalen and Deutsche Forschungsgemeinschaft is gratefully acknowledged. Copyright: Copyright 2008 Elsevier B.V., All rights reserved.

PY - 2007/5/17

Y1 - 2007/5/17

N2 - Several positioning tasks demand translatory drive instead of rotary motion. To achieve drives that are capable, e.g., to drive the sunroof of a car or to lift a car's window, multiple miniaturized motors can be combined. But in this case many other questions arise: The electromechanical behavior of the individual motors differs slightly, the motor characteristics are strongly dependent on the driving parameters and the driven load, many applications need some extra power for special cases like overcoming higher forces periodically. Thus, the bundle of motors has to act well-organized and at last controlled to get an optimized drive that is not oversized and costly.

AB - Several positioning tasks demand translatory drive instead of rotary motion. To achieve drives that are capable, e.g., to drive the sunroof of a car or to lift a car's window, multiple miniaturized motors can be combined. But in this case many other questions arise: The electromechanical behavior of the individual motors differs slightly, the motor characteristics are strongly dependent on the driving parameters and the driven load, many applications need some extra power for special cases like overcoming higher forces periodically. Thus, the bundle of motors has to act well-organized and at last controlled to get an optimized drive that is not oversized and costly.

KW - Characteristics

KW - Control

KW - High power

KW - Modeling

KW - Ultrasonic linear motor

UR - http://www.scopus.com/inward/record.url?scp=43249103498&partnerID=8YFLogxK

U2 - 10.1007/s10832-007-9123-5

DO - 10.1007/s10832-007-9123-5

M3 - Article

AN - SCOPUS:43249103498

SN - 1385-3449

VL - 20

SP - 153

EP - 158

JO - Journal of electroceramics

JF - Journal of electroceramics

IS - 3-4

ER -

Driving concepts for bundled ultrasonic linear motors

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Cite this