Energy-Efficient Drive Concepts in Metal-Forming Production

Bernd Arno Behrens; Anas Bouguecha; Richard Krimm; Sergej Teichrib; Thomas Nitschke

doi:10.1016/j.procir.2016.05.039

Energy-Efficient Drive Concepts in Metal-Forming Production

Bernd Arno Behrens
, Anas Bouguecha
, Richard Krimm
, Sergej Teichrib
, Thomas Nitschke^*

^*Corresponding author for this work

Institute of Metal Forming and Metal Forming Machines

Research output: Contribution to journal › Conference article › Research › peer review

Abstract

Nowadays, efficient drive solutions for the production industry are more important than ever. In view of this, new energy-efficient drive concepts for forming presses and sheet metal feeding systems are developed at the IFUM. The novel press drive is based on a power-split design, which allows a variable ram-kinematics with reduced total costs of ownership in comparison to conventional servo presses. The new feeding concept will be able to realize the contactless feed of electrically conductive sheet metals by means of electromagnetic forces. Since only the sheet metal has to be accelerated, the energy efficiency and feeding rate can be increased significantly.

Original language	English
Pages (from-to)	707-712
Number of pages	6
Journal	Procedia CIRP
Volume	50
DOIs	https://doi.org/10.1016/j.procir.2016.05.039
Publication status	Published - 9 Aug 2016
Event	26th CIRP Design Conference, 2016 - Stockholm, Sweden Duration: 15 Jun 2016 → 17 Jun 2016

UN Sustainable Development Goals (SDGs)

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

energy efficiency
metal forming
servo press
sheet metal feeder

ASJC Scopus subject areas

Control and Systems Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.procir.2016.05.039Licence: CC BY-NC-ND 4.0

Cite this

@article{e866a68397e44d4c9d4f0746085ba2ea,

title = "Energy-Efficient Drive Concepts in Metal-Forming Production",

abstract = "Nowadays, efficient drive solutions for the production industry are more important than ever. In view of this, new energy-efficient drive concepts for forming presses and sheet metal feeding systems are developed at the IFUM. The novel press drive is based on a power-split design, which allows a variable ram-kinematics with reduced total costs of ownership in comparison to conventional servo presses. The new feeding concept will be able to realize the contactless feed of electrically conductive sheet metals by means of electromagnetic forces. Since only the sheet metal has to be accelerated, the energy efficiency and feeding rate can be increased significantly.",

keywords = "energy efficiency, metal forming, servo press, sheet metal feeder",

author = "Behrens, \{Bernd Arno\} and Anas Bouguecha and Richard Krimm and Sergej Teichrib and Thomas Nitschke",

note = "Funding Information: The IGF-project {\textquoteleft}Kontaktfreier Vorschub f{\"u}r hohe Bandgeschwindigkeiten{\textquoteright} (16749N/1) of the German Machine Tools' Association (VDW) was supported by the German Federation of Industrial Research Associations (AiF) within the framework of the Industrial Collective Research (IGF) program by the Federal Ministry of Economics and Technology on the basis of a decision by the German Bundestag. Funding Information: Pressenantrieb mit Leistungsverzweigung und mechanisch gekoppeltem Schwungrad{\textquoteright} was promoted under BE1691/119-1 by the German Research Foundation (DFG). The authors would like to thank the German Research Foundation (DFG) for their support. Publisher Copyright: {\textcopyright} 2016 The Authors. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.; 26th CIRP Design Conference, 2016 ; Conference date: 15-06-2016 Through 17-06-2016",

year = "2016",

month = aug,

day = "9",

doi = "10.1016/j.procir.2016.05.039",

language = "English",

volume = "50",

pages = "707--712",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Energy-Efficient Drive Concepts in Metal-Forming Production

AU - Behrens, Bernd Arno

AU - Bouguecha, Anas

AU - Krimm, Richard

AU - Teichrib, Sergej

AU - Nitschke, Thomas

N1 - Funding Information: The IGF-project ‘Kontaktfreier Vorschub für hohe Bandgeschwindigkeiten’ (16749N/1) of the German Machine Tools' Association (VDW) was supported by the German Federation of Industrial Research Associations (AiF) within the framework of the Industrial Collective Research (IGF) program by the Federal Ministry of Economics and Technology on the basis of a decision by the German Bundestag. Funding Information: Pressenantrieb mit Leistungsverzweigung und mechanisch gekoppeltem Schwungrad’ was promoted under BE1691/119-1 by the German Research Foundation (DFG). The authors would like to thank the German Research Foundation (DFG) for their support. Publisher Copyright: © 2016 The Authors. Copyright: Copyright 2017 Elsevier B.V., All rights reserved.

PY - 2016/8/9

Y1 - 2016/8/9

N2 - Nowadays, efficient drive solutions for the production industry are more important than ever. In view of this, new energy-efficient drive concepts for forming presses and sheet metal feeding systems are developed at the IFUM. The novel press drive is based on a power-split design, which allows a variable ram-kinematics with reduced total costs of ownership in comparison to conventional servo presses. The new feeding concept will be able to realize the contactless feed of electrically conductive sheet metals by means of electromagnetic forces. Since only the sheet metal has to be accelerated, the energy efficiency and feeding rate can be increased significantly.

AB - Nowadays, efficient drive solutions for the production industry are more important than ever. In view of this, new energy-efficient drive concepts for forming presses and sheet metal feeding systems are developed at the IFUM. The novel press drive is based on a power-split design, which allows a variable ram-kinematics with reduced total costs of ownership in comparison to conventional servo presses. The new feeding concept will be able to realize the contactless feed of electrically conductive sheet metals by means of electromagnetic forces. Since only the sheet metal has to be accelerated, the energy efficiency and feeding rate can be increased significantly.

KW - energy efficiency

KW - metal forming

KW - servo press

KW - sheet metal feeder

UR - https://www.scopus.com/pages/publications/84986601879

U2 - 10.1016/j.procir.2016.05.039

DO - 10.1016/j.procir.2016.05.039

M3 - Conference article

AN - SCOPUS:84986601879

SN - 2212-8271

VL - 50

SP - 707

EP - 712

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 26th CIRP Design Conference, 2016

Y2 - 15 June 2016 through 17 June 2016

ER -

Energy-Efficient Drive Concepts in Metal-Forming Production

Abstract

UN Sustainable Development Goals (SDGs)

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Cite this