Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien

Berend Denkena; Marc André Dittrich; Stefan Henning

doi:10.3139/104.111569

Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien

Translated title of the contribution: Automated development of customized multi-step drill tools - Reduction of costs and time for designing through the consistent use of computer-aided technologies

Berend Denkena
, Marc André Dittrich
, Stefan Henning

Institute of Production Engineering and Machine Tools

Research output: Contribution to journal › Article › Research › peer review

Abstract

Automated Development of Customized Multi- step Drill Tools. Using multi-step tools in metal cutting processes, different cutting operations can be carried out with only one tool. Due to this, nonproductive times and tool costs can be reduced. The presented approach focuses upon the computer aided standardized development of such multi step tools. A reduction of cost and time for designing the individual tools can be achieved. Thereby, multi-step tools can become an attractive alternative for manufacturing components even in small batch productions.

Translated title of the contribution	Automated development of customized multi-step drill tools - Reduction of costs and time for designing through the consistent use of computer-aided technologies
Original language	German
Pages (from-to)	479-482
Number of pages	4
Journal	Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online)
Volume	111
Issue number	9
DOIs	https://doi.org/10.3139/104.111569
Publication status	Published - Sept 2016

ASJC Scopus subject areas

General Engineering
Strategy and Management
Management Science and Operations Research

Access to Document

10.3139/104.111569

Cite this

@article{f9eee659d38b45819b16ff59186218c0,

title = "Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchg{\"a}ngigen Einsatz rechnergest{\"u}tzter Technologien",

abstract = "Automated Development of Customized Multi- step Drill Tools. Using multi-step tools in metal cutting processes, different cutting operations can be carried out with only one tool. Due to this, nonproductive times and tool costs can be reduced. The presented approach focuses upon the computer aided standardized development of such multi step tools. A reduction of cost and time for designing the individual tools can be achieved. Thereby, multi-step tools can become an attractive alternative for manufacturing components even in small batch productions.",

author = "Berend Denkena and Dittrich, \{Marc Andr{\'e}\} and Stefan Henning",

year = "2016",

month = sep,

doi = "10.3139/104.111569",

language = "Deutsch",

volume = "111",

pages = "479--482",

journal = "Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb (ZWF) (online)",

issn = "0947-0085",

publisher = "de Gruyter",

number = "9",

}

Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien. / Denkena, Berend; Dittrich, Marc André; Henning, Stefan.
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online), Vol. 111, No. 9, 09.2016, p. 479-482.

Research output: Contribution to journal › Article › Research › peer review

TY - JOUR

T1 - Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer

T2 - Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien

AU - Denkena, Berend

AU - Dittrich, Marc André

AU - Henning, Stefan

PY - 2016/9

Y1 - 2016/9

N2 - Automated Development of Customized Multi- step Drill Tools. Using multi-step tools in metal cutting processes, different cutting operations can be carried out with only one tool. Due to this, nonproductive times and tool costs can be reduced. The presented approach focuses upon the computer aided standardized development of such multi step tools. A reduction of cost and time for designing the individual tools can be achieved. Thereby, multi-step tools can become an attractive alternative for manufacturing components even in small batch productions.

AB - Automated Development of Customized Multi- step Drill Tools. Using multi-step tools in metal cutting processes, different cutting operations can be carried out with only one tool. Due to this, nonproductive times and tool costs can be reduced. The presented approach focuses upon the computer aided standardized development of such multi step tools. A reduction of cost and time for designing the individual tools can be achieved. Thereby, multi-step tools can become an attractive alternative for manufacturing components even in small batch productions.

UR - https://www.scopus.com/pages/publications/85019193749

U2 - 10.3139/104.111569

DO - 10.3139/104.111569

M3 - Artikel

AN - SCOPUS:85019193749

SN - 0947-0085

VL - 111

SP - 479

EP - 482

JO - Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online)

JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (online)

IS - 9

ER -

Methode zur automatisierten Auslegung kundenindividueller Stufenbohrer: Reduzierung von Kosten und Entwicklungszeiten durch den durchgängigen Einsatz rechnergestützter Technologien

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Cite this